Electricity-free pellet system
Heating with pellets.
No electricity needed.
Max Blank pellet system inserts burn by natural chimney draught alone – in a real wood-burning stove, with a real flame picture. And tomorrow you can heat with logs again.
Max Blank combines the fascination of a real fire with the freedom to heat with pellets without electricity.
Pellets today. Logs tomorrow. Always independent.
The advantages of the pellet system insert
Small in the firebox. Big in effect.
No electricity at all
No mains connection, no fan, no control unit. The fire keeps burning even during a power cut.
Converted in no time
Insert the pellet box – or take it out and heat with logs. With suitable combination stoves.
Easy to use
Fill, light, set the air slider – done.
Quiet in operation
Without a fan or motor, all you hear is the fire.
Real flame picture
A pellet fire behind the glass of your Max Blank stove – with all the romance of a real fire.
Clean and safe
A closed box made of heat-resistant stainless steel in the firebox.
High efficiency
For example 85.3% for the KO2 XL (test value to DIN EN 13240). Values depend on insert and stove.
Low maintenance
No electronics that need servicing or replacing.
How it works
The pellet box sits in the firebox of your stove. Fresh air flows in from below through the perforated base, and the natural chimney draught keeps the fire going.
- 1Insert the right pellet system insertEach insert is matched to specific Max Blank models.
- 2Fill with certified wood pelletsWood pellets Ø 6 mm, e.g. ENplus A1 or DINplus.
- 3Light it and enjoy the warmthAs described in the operating instructions. Refill only when cold.
One stove. Two fuels.
With suitable Max Blank combination stoves the choice is yours: the convenience of pellets or the crackle of logs.
Electricity-free pellet system inserts
Each insert fits specific stoves and fireplace inserts. Choose your model – we will show you the right insert.
KO2 XL
Max. 7.5 kg pellets
Fits Rio, Toulouse, Lille, Bonn, Toulon II and KE 2, among others
Details & compatible stoves
KO2 S
Max. 3.8 kg pellets
Fits the same stoves as the KO2 XL – smaller capacity
Details & compatible stoves
The pellet system insert is an optional accessory and is not included with the stove.
Max Blank manufacturing
Our own development – perfectly matched to every firebox
From the first idea to the finished product, everything at Max Blank is made in-house – including the electricity-free pellet system. It is developed specifically for our stoves and fireplace inserts and therefore fits their fireboxes exactly.
- 01Our own development, matched to every stove model
- 02Robust pellet box designed for high temperatures
- 03Advice, installation and maintenance by selected specialist partners
Frequently asked questions
Does the pellet system fit every Max Blank stove?
There is a matching insert for all stoves in the current range and for most fireplace inserts. Which one fits depends on the model.
Is the insert included with the stove?
No, the pellet system insert is always an optional accessory.
Which pellets may I use?
Only wood pellets Ø 6 mm to EN 14961-2 (A1), e.g. ENplus A1, DINplus or ÖNorm M7135.
How long does one filling burn?
That depends on the insert, the stove and the chimney draught. The tested values are listed in the technical data of each insert.
Discover what the electricity-free pellet system can do for you.
Your Max Blank dealer will show you which stove and which insert suit your home.